Timberland boots are a popular choice for both men and women, and they can provide years of wear if they’re properly taken care of. They are known for being tough and sturdy, but even the best boots can wear out if not properly taken care of.
The amount of money you’ve spent on a good pair of Timberlands boots is too much to wear casually. You want to ensure they last as long as possible, which means knowing how to protect and care for them.
In this post, we’ll give you some tips on how to protect Timberland boots from damage so that you can enjoy them for the seasons to come. Your boots will last many winters and even summers to come by following these simple steps.
How to Protect Timberland Boots
Protecting your Timberlands from damage is easy with the right cleaning process. There are two types of material and methods for each, so make sure you use them depending on the boot you own.
Let’s look at the two different materials’ cleaning methods below:
1. Nubuck, Canvas, and Suede Timberland Protection
Waterproofing is a must for any boot that will be getting water stains. What you need;
- Cleaning kit
- Brush and suede eraser
- Stain and water protector
Your boots will look as good as on day one if you ensure they’ve been cleaned before applying any water protector. The outside might get wet, but if there is any dirt or debris from walks, they will stay stuck once the protector is applied before dry cleaning.
Cleaning takes less than five minutes and can be done by anyone with access to enough clean water.
The cleaning kit should have everything you will need. Applying the simple steps below will eliminate the dirt or debris that might get stuck on your timberland boots.
- Use the brush to rub off any dirt
- Remove stains using the eraser
- Repeat brushing it
When applying the water-repellent spray to your boots, don’t be discouraged by the amount of time it takes for them to dry. The process is similar when using any other repellant. Start with a light coat and let it sit 30 minutes before getting back in there again for another layer or two.
With the second spraying, be sure to saturate your boot material fully. After applying it, make sure there is no excess liquid leftover on top by rubbing with a rug. Dry them overnight.
Knowing that your Timberland boots will keep you dry, you can now go out into the elements without worry.
See also: What socks do you wear with timbs?
2. Smooth, Pebbled, Waxed, and Oiled Timberland Boots Protection
If you want to be able to wear your Timberland boots for as long and enjoy them the most, then get a pair that has been designed with tough materials like these. The durability will ensure these are perfect even if they go through all sorts of treatments. But you can still take care not to abuse them too much.
Here are things you need to take care of them;
- Balm proofer
- Leather protector
- Leather preservative
- Stain and water repellant
Rub off Dirt
If you have dirty boots that need cleaning, the first thing to do is remove loose dirt. Unlike nubuck or suede Timberland footwear cleaned with dry cleaners, these can use liquid products.
Applying Leather Protector
You’ll want to make sure your boots are clean and dry before applying the protector. Rubbing a small amount on each boot will cover every inch, so don’t waste any. Apply the protector by scooping up some with an old cloth and rubbing across every inch until it’s completely covered.
Let your Timberland boots dry, and give them plenty of time to absorb all their protector before putting on another layer. Drying is only possible with longer sessions.
The Second Application of Leather Protector
Spraying them again is a cool trick you can do with your Timberland boots. It will give them an extra protective layer of sorts and make sure nothing gets through to ruin the durable material on these babies. But remember, they need time for this step to work properly, so don’t take another step until after all raw surfaces are dry again.
Time to finish up. Protect your Timberland boots with any stain and water protector you purchased. Ensure it covers every inch of the boot. Even though 30 minutes is enough for drying, we recommend overnighting them not to wear out too quickly later on.
FAQs About How to Protect Timberland Boots
Will Rain Mess up Timberland Boots?
Of course, Timberlands’ manufacturers know that you’re looking to stay stylish no matter what the season throws at you – which means their boots won’t disappoint.
They’ve got everything from waterproof leathers and seam-sealed construction to protect against water damage while providing maximum comfort during even your most rigorous adventures, along with fashion-forward styles galore.
So there’s always one guaranteed fit among this selection of waterproof footwear options available from Timberland boots.
Are Timberlands Actually Waterproof?
Timberland boots are waterproof because they have a special membrane that keeps water out. They also use high-quality leather and construction to make sure your feet stay dry in wet conditions, even if it’s pouring outside.
See also: How do you know if Timberland boots are fake?
How Do You Take Care of Timberlands?
Ensure your timberland boots are clean, dry, and buffed before putting them back on. If they’re not as shiny as before, give them another wipe with a cloth or paper towel. This eliminates any residue that might be left behind from the cleaner/wipes you used earlier in this process.
Timberland boots are a widely known and expensive purchase. It is important to protect them to last for years to come. Follow the above-outlined tips to ensure your Timberlands look good and function well for many adventures.
So now that you know how to protect your Timberland boots, it’s important to put this knowledge into practice. Hopefully, this post has been of help to you on how best you can protect them.