If you’ve ever walked in the snow or ice, then you know it’s a slippery and treacherous experience. The best thing you can do to avoid falls is to be aware of where you are stepping and use your arms to balance yourself. And with winter just around the corner, this article will show you how to make boots slip resistant so you can walk with confidence this season.
These days, everyone is looking for a way to stay warm and dry during the winter months. That’s why there are so many different types of boots on the market. However, not all of these boots will keep your feet as warm as you would like because they don’t have slip resistance.
Slip-resistant soles are meant to provide traction against slippery surfaces, such as ice and snow. They give you a better grip and prevent you from losing your footing on slick surfaces. Luckily, there are some things you can do to make your slippery boots non-slip.
How to Make Boots Slip Resistant
If you dont want to fall every time you walk out on a snowy day, here are six ways to make your boots slip-resistant.
1. Use Non-Slip Grip Pads
Grip pads are very useful because they make any boots slip-resistant. They’re designed to prevent hard surfaces from becoming slippery. You can buy them for your shoes and boots. Check this one out
Non-Slip Shoes Pads
[amazon box=”B07X45N9BS” grid=”1″]
There is a large selection of different sizes and shapes, so you should be able to find one that fits your footwear perfectly. To apply these grip pads, all you have to do is carefully cut them down to size and stick them on the bottom of your boots or shoes!
2. Wax Your Boot Soles
If you don’t have any grip pads, waxing your boots is one of the best ways to make them slip-resistant. All you need to do is apply a thin layer of Skid Stop Wax to both soles and let it dry overnight.
Once this has been done, all you need to do is take a hairdryer and heat up the wax until it melts and gets sticky. This will give your boots much more traction against slippery surfaces!
Like with most other techniques, doing this might take a couple of tries before things look perfect, so be patient and try not to get frustrated if things aren’t looking right after just one attempt!
3. Scuff up the Soles
Another way to make your boots slip-resistant is by scuffing up the soles. By taking sandpaper or a foam buffer and rubbing the area, you want to add grips to create small grooves and scuffs.
You can do this on the bottom of any boots, but try to avoid scuffing up your boots if you plan to wear them on a regular basis. This will give you much more traction against slippery surfaces like snow and ice.!
It may seem like a bit of work, but it really is very easy to do. And once you’ve done this trick, you won’t have any more problems walking in slippery shoes!
4. Use Rubberized Spray Paint
Rubberized spray paint is another great way to make boots slip-resistant. All you have to do is clean the soles of your footwear, wait for them to dry, and then apply light coats of this product until you are satisfied with the results.
While doing this might take some time, it will result in high-quality results that can be used on all sorts of surfaces! Remember that while using rubberized spray paint might give you a more permanent solution, it won’t allow you to remove it without damaging the surface underneath if things aren’t looking right after applying it. So proceed cautiously when doing this!
Check out this Rubberized spray paint:
[amazon box=”B00A39ZONG” grid=”1″]
5. Tape up your Soles
Before doing anything else, make sure that you buy some good quality electrical tape and place it around the entire outer sole of your footwear. You should be able to find this at any home improvement store for a relatively low price.
To apply the tape, take off one side and gently lay it down across both soles. Afterward, you’ll want to fold over the other end and press it firmly against each side so that there are no gaps or wobbly parts when walking!
Doing this is an effective way to make your boots slip-resistant.
6. Using Salt to Make your Boots Slip Resistant
Salt is another effective method that you can use to make your boots slip-resistant. Sprinkle some of this all over the outsides of your shoes and let them dry completely.
Repeating this process a couple of times should be enough to get really great results. Just remember that salt can damage certain fabric materials, so keep an eye on what you’re doing when doing this!
When applying salt on boots, try not to apply it near or inside of any openings such as the mouth of the boot because it will cause them to wear out quicker than they would otherwise!
Frequently Asked Questions
Can I make my boots more grippy?
Yes, there are a bunch of different ways that you can do this. Some of the best include using grip tape, waxing your boots, scuffing up the soles, and using rubberized spray paint.
Does wearing socks over shoes stop you from slipping?
It can help a bit, but it won’t help you that much. You should try some of the other techniques on this list instead if you want to gain better traction!
Is salt effective for making boots slip-resistant?
Salt is another popular method for increasing grip on footwear. However, it’s important to remember that salt can damage certain fabric materials, so proceed cautiously when doing this
There are many ways of how to make boots slip resistant. They also don’t have to be incredibly expensive either!
Doing this is a great way to avoid falling on slippery surfaces such as ice and snow, which can cause injuries or damage your gear!
Hopefully, the above tricks will come in handy the next time you go out and want to prevent slipping and sliding while walking around.